Mitsubishi MELSEC-A A6MD Operating Manual page 15

3. SYSTEM BOOT PROCEDURE
/MELSEC
Table 3.1 Name and Function of Common Keys
Key Name
Mode Keys
Emergency Stop Key
[BREAK]
Cancel
[CAN1
Monitor Stop
* ,
Execution
Keyed-in Data and
Message Clear
[HOME CLEAR]
Help
F 7 1
Buzzer Volume
[BUZZER]
Contrast
[CONT RAST]
Data Set
Function
Selects the mode.
Displays the test mode escape screen in the test
mode.
Stops the PCPU immediately.
Stops all axes being controlled after deceleration
according
to
the preset immediate deceleration
time.
Returns the display
t o
the previous screen.
Switches monitoring stop and monitoring execu-
tion on the monitor mode screen.
Deletes keyed in data.
Deletes the message displayed in the message
column.
Displays the Help screen (detailed operation in-
formation) for each screen.
This is a toggle key: pressing the key again
returns the display
to
the screen from which the
Help screen was called.
Changes the buzzer volume to either high or low.
Sets the plasma display contrast.
Sets the keyed-in data when this key is pressed.
Remarks
Effective only in the test
mode.
Effective when the cor-
responding guide mes-
sage is displayed on the
monitor mode screen.
Effective when the cor-
responding guide mes-
sage is displayed.