Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Corporation 4-13-23, Shibaura, Minato-Ku Tokyo 108-0023, JAPAN VCCI Statement English-1...
U.S. registered trademark. All other brands and product names are trademarks or registered trademarks of NERGY their respective owners. As an E Partner, NEC-Mitsubishi Electric Visual Systems Corporation has determined that this product meets the NERGY guidelines for energy efficiency. NERGY The E emblem does not represent EPA endorsement of any product or service.
Contents Your new Diamond Pro 2070 monitor box* should contain the following: • Diamond Pro 2070 Monitor with tilt/swivel base • Power cord • Video Signal Cable (VGA - VGA) • User’s Manual • USB cable • Sales Office List •...
Quick Start To attach the Diamond Pro 2070 monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3.
Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSM menu. Exits to the OSM controls main menu. NOTE: Deactivates the OSM menu and activates the OSM menu when the OSM is turned off.
(GLOBALSYNC, TOP LEFT, TOP RIGHT, BOTTOM LEFT or BOTTOM RIGHT), use the –/+ control buttons to fine tune the GlobalSync corrections. NOTE: Mitsubishi recommends that you perform GlobalSync correction while running a typical application such as a spreadsheet or text document. English-6...
Page 9
Tools 2 Language: OSM controls menus are available in six languages. OSM Position: You can choose where you would like the OSM controls menu to appear on your screen. Selecting OSM Position allows you to manually adjust the OSM controls menu left, right, up or down. OSM Turn Off: The OSM controls menu will stay on as long as it is in use.
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE DIAMOND PRO 2070 COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
Page 11
• Clean your monitor A special coating is provided on the glass (CRT) surface of this monitor to reduce a reflection and static electricity on the glass surface. Due to the delicate coating on the glass surface, use a lint-free, nonabrasive cloth (cotton or equivalent) and a non-alcohol, neutral, nonabrasive cleaning solution to minimise dust.
1024 x 768 @ 50 to 160 Hz 1280 x 1024 @ 50 to 127 Hz 1600 x 1200 @ 50 to 109 Hz ......NEC-Mitsubishi Electronics Display cites 1800 x 1350 @ 50 to 98 Hz recommended resolution a 85 Hz for 1800 x 1440 @ 50 to 92 Hz optimal display performance.
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size. GlobalSync /Corner Purity Control: Mitsubishi’s unique design automatically eliminates picture impurities that may result from stray magnetic fields (including the earth ’s permanent magnets,etc.) and now allows you to easily adjust impurities in the four corners of your monitor.
Check the signal cable and computer in case that the diagnosis message displayed. • Contact Mitsubishi Customer Service in case that the diagnosis message still does not display. In case that no diagnosis message displayed with LED lit in orange.
TCO’99 (Black model) Congratulations! You have just purchased a TCO’99 Lead** approved and labeled product! Your choice has Lead can be found in picture tubes, display screens, solders and provided you with a product developed for capacitors. Lead damages the nervous system and in higher professional use.
TCO’03 (White model) Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union). For more information, and for help in recycling your old NEC or Mitsubishi monitors, please visit our website at http://www.nec-mitsubishi.com (in Europe) or...