Siemens SINUMERIK 840D sl Programming Manual page 1206

Tables
4.1 Operations
Operation Type
for explanations, see legend (Page 1197).
1) 2) 3) 4) 5)
CUT3DCD G
CUT3DF G
CUT3DFD G
CUT3DFF G
CUT3DFS G
CUTCONOF G
6)
CUTCONON G
CUTMOD A
CUTMODK A
CYCLE60 C (T) Engraving cycle
CYCLE61 C (T) Face milling
CYCLE62 C (T) Contour call
CYCLE63 C (T) Contour pocket milling
CYCLE64 C (T) Contour pocket predrilling
CYCLE70 C (T) Thread milling
CYCLE72 C (T) Path milling
CYCLE76 C (T) Milling the rectangular spigot
CYCLE77 C (T) Circular spigot milling
CYCLE78 C (T) Mill cutting thread
CYCLE79 C (T) Multiple edge
CYCLE81 C (T) Drilling, centering
CYCLE82 C (T) Drilling, counterboring
CYCLE83 C (T) Deep-hole drilling
CYCLE84 C (T) Tapping without compensating chuck
CYCLE85 C (T) Reaming
CYCLE86 C (T) Boring
CYCLE92 C (T) Parting
CYCLE95 C (T) Stock removal along the contour
CYCLE98 C (T) Thread chain
CYCLE99 C (T) Thread cutting
CYCLE116 C (M) Calculation of center point and radius of a cir‐
1206
Meaning
1)
3D TRC in relation to a differential tool for cir‐
cumferential milling
3D TRC for face milling with change in orien‐
tation
3D TRC in relation to a differential tool for face
milling with change in orientation
3D TRC for face milling with constant orienta‐
tion. The tool orientation is the direction de‐
fined by G17 - G19 and, in some cases, rota‐
ted by a frame.
3D TRC for face milling with constant orienta‐
tion. The tool orientation is defined by G17 -
G19 and is not influenced by frames.
Deactivate tool radius compensation
Activate tool radius compensation
Activate Modification of the offset data for ro‐
tatable tools (in connection with orientable tool
carriers)
Activate Modification of the offset data for ro‐
tatable tools (in connection with orientation
transformations defined by kinematic chains)
cle
W TP SA Description see
2) 3) 4)
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
m +/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-MC
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
5)
NC programming