Siemens SINUMERIK 840D sl Programming Manual page 1208

Tables
4.1 Operations
Operation Type
for explanations, see legend (Page 1197).
1) 2) 3) 4) 5)
CYCLE978 C (M) Measure the position of an edge in the work‐
CYCLE979 C (M) Determine center in the plane, measure radi‐
CYCLE982 C (M) Calibrate tool probe, measure turning drilling
CYCLE994 C (M) Determine the workpiece zero in the selected
CYCLE995 C (M) Measure the angularity of the spindle on a ma‐
CYCLE996 C (M) Determine transformation-relevant data for
CYCLE997 C (M) Determine center and diameter of a ball,
CYCLE998 C (M) Determine the angular position of a surface
CYCLE4071 C (T) Longitudinal grinding with infeed at the rever‐
CYCLE4072 C (T) Longitudinal grinding with infeed at the rever‐
CYCLE4073 C (T) Longitudinal grinding with continuous infeed
CYCLE4074 C (T) Longitudinal grinding with continuous infeed
CYCLE4075 C (T) Surface grinding with infeed at the reversal
CYCLE4077 C (T) Surface grinding with infeed at the reversal
CYCLE4078 C (T) Surface grinding with continuous infeed
CYCLE4079 C (T) Surface grinding with intermittent infeed
CYCLE9960 C (M) Measure kinematics completely
Operations D ... F
Operation Type
1)
for explanations, see legend (Page 1197).
1)2)3)4)5)
D A
D0 A
DAC K
DC K
1208
Meaning
1)
piece coordinate system
us of circle segment.
and milling tools (only for turning)
measuring axis with 2-point measurement (on‐
ly for turning).
chine tool
kinematic transformations with rotary axes
measure center of three distributed balls
(plane) referred to the working plane, deter‐
mine angle of edges in the workpiece coordi‐
nate system.
sal point
sal point and cancel signal
and cancel signal
point
point and cancel signal
Meaning
Tool offset number
With D0, offsets for the tool are ineffective
Absolute non-modal axis-specific diameter
programming
Absolute dimensions for rotary axes, ap‐
proach position directly
W TP SA Description see
2) 3) 4)
+/- PM-MC
+/- PM-MC
+/- PM-MC
+/- PM-MC
+/- PM-MC
+/- PM-MC
+/- PM-MC
+/- PM-MC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-NC
+/- PM-MC
W TP SA Description see
2) 3) 4)
+ PM-NC
+ PM-NC
s + PM-NC
s + PM-NC
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
5)
5)
NC programming