Siemens SINUMERIK 840D sl Programming Manual page 1281

Tool management
Identifier Parameter
SETMTH 1.
INT:
Tool carrier
no.
SETPIECE 1.
INT:
Value used
when decre‐
menting
1.
SETTA VAR INT:
Status = re‐
sult of the op‐
eration (re‐
turn value)
SETTIA VAR INT:
Status = re‐
sult of the op‐
eration (re‐
turn value)
TCA 1.
STRING[32]:
Tool identifier
TCI 1.
INT:
No. of the buf‐
fer
MVTOOL 1.
INT:
Status
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
2.
INT: Spin‐
dle no.
2. 3.
INT: Maga‐ INT: Wear
zine no. group no.
INT: Maga‐ INT: Wear
zine no. group no.
2. 3.
INT: INT:
Duplo no. Tool carrier
no.
2.
INT:
Tool carrier
no.
2. 3.
INT: Maga‐ INT:
zine no. Location no.
4.
INT:
Tool sub‐
group
INT:
Tool sub‐
group
4. 5.
INT: Maga‐ INT: Tar‐
zine no. af‐ get loca‐
ter moving tion no.
after
moving
Tables
4.4 Predefined procedures
Explanation
Set tool carrier no.
Decrement workpiece
counter of the spindle
Update the count mon‐
itoring data of the tools
associated with the
machining process
Activate tool from wear
group
Deactivate tool from
wear group
Tool selection/change
irrespective of the tool
status
Load tool from buffer
into the magazine
Language command
to move tool
1281