Siemens SINUMERIK 840D sl Programming Manual page 1284

Tables
4.4 Predefined procedures
Electronic gear
Identifier Parameter
EGON 1.
AXIS:
Follow‐
ing axis
EGONSYN 1.
AXIS:
Follow‐
ing axis
EGONSYNE 1.
AXIS:
Follow‐
ing axis
EGOFS 1.
AXIS:
Follow‐
ing axis
EGOFC 1.
AXIS:
Follow‐
ing spin‐
dle
1284
2. 3. / 6. / 4. / 7. /
9. / 12. / 10. / 13. /
15. 16.
STRING: AXIS: REAL:
Block Leading Numera‐
change axis tor of the
behavior coupling
factor
2. 3. 4. / 8. /
12. / 16. /
20.
STRING: REAL: AXIS:
Block Synchron Leading
change ized posi‐ axis
behavior tion of
the fol‐
lowing
axis
2. 3. 4.
STRING: REAL: STRING:
Block Synchron Ap‐
change ized posi‐ proach
behavior tion of mode
the fol‐
lowing
axis
2. - n.
AXIS:
Leading axis
5. / 8. /
11. / 14. /
17.
REAL:
Denomi‐
nator of
the cou‐
pling fac‐
tor
5. / 9. / 6. / 10. / 7. / 11. /
13. / 17. / 14. / 18. / 15. / 19. /
21. 22. 23.
REAL: REAL: REAL:
Synchron Numera‐ Denomi‐
ized posi‐ tor of the nator of
tion of coupling the cou‐
the lead‐ factor pling fac‐
ing axis tor
5. / 9. / 6. / 10. / 7. / 11. /
13. / 17. / 14. / 18. / 15. / 19. /
21. 22. 23.
AXIS: REAL: REAL:
Leading Synchron Numera‐
axis ized posi‐ tor of the
tion of coupling
the lead‐ factor
ing axis
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
Explanation
Electronic
gear ON with‐
out synchroni‐
zation
Electronic
gear ON with
synchroniza‐
tion
8. / 12. / Electronic
16. / 20. / gear ON with
24. synchroniza‐
tion and
REAL:
specification
Denomi‐
of the ap‐
nator of
proach mode
the cou‐
pling fac‐
tor
Turn off elec‐
tronic gear se‐
lectively
Switch off
electronic
gear (version
only for spin‐
dles)
NC programming