Mirrors; Headlight - BMW S 1000XR Rider's Manual

Mirrors

5
Adjusting mirrors
64
Turn the mirror to the desired
z
position.
Adjusting mirror arm
Push protective cap 1 for the
threaded fastener up on the
mirror arm.
Slacken locknut 2.
Turn the mirror arm to the ap-
propriate position.
Tighten the locknut to the spe-
cified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Mirror (locknut) to ad-
apter
22 Nm (Left-hand thread)
Push protective cap 1 over the
threaded fastener.

Headlight

Adjusting headlight for
driving on left/driving on
right
This motorcycle has a
symmetric-beam low-beam
headlight. If the motorcycle
is ridden in a country where
the opposite rule of the road
applies, its symmetric low-
beam headlight means that
no measures are necessary to
prevent the headlight beam from
dazzling oncoming traffic.
Headlight beam throw and
spring preload
Headlight beam throw is gener-
ally kept constant when spring
preload is adjusted to suit load.
Headlight beam throw is set cor-
rectly ex-works.