BMW S 1000XR Rider's Manual page 45

Symbol 1 for the automatic day-
time riding light appears on the
display.
If symbol 1 does not appear,
SETUP
this is because the
EQIP:DRL AUTO
active. Proceed as follows in
order to switch the daytime
riding light to automatic:
Repeatedly short-press INFO 2
SETUP MENU ENTER
until
appears on the display.
Long-press INFO 2.
SETUP MENU
The
Repeatedly short-press TRIP 1
OFF is
or INFO 2 until
EQUIPMENT ENTER
appears on the display.
Long-press INFO 2.
SETUP EQUIPMENT
The
menu opens.
Repeatedly short-press TRIP 1
or INFO 2 until
EQIP:DRL AUTO
on the display.
Long-press INFO 2 to switch
automatic daytime riding light
ON
Long-press TRIP 1 to return to
the default reading.
opens.
Symbol 1 for the automatic day-
SETUP
time riding light appears on the
display.
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e. B. in a
SETUP
tunnel). When sufficient ambi-
appears
ent brightness is detected, the
.
4
43
z