Automatic Stability Control; (Asc) - BMW S 1000XR Rider's Manual

Press and hold button 1 un-
til first the ASC/DTC indicator
light 3 and then the ABS in-
dicator and warning light 2
change status.
The ASC/DTC setting remains
unchanged.
ABS telltale and warning
light shows.
Release button 1 within two
seconds.
ABS telltale and warning
light remains on.
ABS is switched off.
OE
with ABS Pro
ABS Pro is switched off.
ABS Switching on
Press and hold button 1 un-
til first the ASC/DTC indicator
light 3 and then the ABS in-
dicator and warning light 2
change status.
The ASC/ DTC setting remains
unchanged.
ABS telltale and warning
light goes out; if self-
diagnosis has not completed it
starts flashing.
If the coding plug is not inser-
ted, you have the alternative of
switching the ignition off and
then on again.
An ABS fault has oc-
curred if the ABS telltale
and warning light shows when
the motorcycle accelerates to
a speed in excess of the min-
imum stated below after the
ignition was switched off and
then on again.
min 10 km/h
Automatic Stability
Control (ASC)
ASC Switching off
Switch on the ignition.
NOTICE
You have the option of deactiv-
ating the ASC function while the
motorcycle is on the move.
4
53
z