9
152
Pull the glass out of the light
housing at the threaded-
fastener side.
z
Turn bulb 2 counter-clockwise
and remove it from the light
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
with LED flashing turn indic-
OE
ators
LED
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED flashing turn indic-
OE
ators
LED
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of dirt and foreign
matter.
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the light
housing and close the housing.