General Instructions; Toolkit - BMW S 1000XR Rider's Manual

General instructions

9
The Maintenance chapter de-
scribes straightforward proced-
128
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
z
work in the repair instructions
on DVD for your vehicle, which
is available from your authorised
BMW Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.

Toolkit

1 Hook wrench
without Dynamic ESA
Adjusting spring preload
for rear wheel (
2 Reversible screwdriver
blade
Phillips PH1 and Torx T25
Remove the side panel
( 153).
Replacing bulbs for front
and rear turn indicators
( 151).
3 Open-ended spanner
Width across flats 14
3 Adjusting mirror arm
( 64).
Adjusting headlight beam
throw (
4 Open-ended spanner
Width across flats 8/10
5 Reversible-blade screw-
driver with star-head and
plain tips
without Dynamic ESA
Adjusting compression-
stage damping for front
OE
wheel (
without Dynamic ESA
66).
Adjust the rebound-
stage damping for front
wheel (
without Dynamic ESA
Adjusting rebound-stage
damping for rear wheel
( 69).
6 Spare fuses with gripping
clamp
Mini-fuses 4 A, 7.5 A and
10 A
65).
OE
68).
OE
69).
OE