BMW S 1000XR Rider's Manual page 79

Needle 3 of the revolution
counter moves all the way to the
position for maximum engine
revolutions.
Phase 2
'General' warning light 2 changes
from red to yellow.
Phase 3
The needle of the revolution
counter moves to the position
for zero engine revolutions.
The indicator and warning lights
go out or start operation as in-
tended.
OE
with ABS Pro
ABS Pro
is displayed.
The display switches to its ordin-
ary display mode. The on-board
computer readings appear on the
display.
If a warning light does not show:
WARNING
Faulty warning lights
No indication of malfunctions
Check all the telltale and warn-
ing lights.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
BMW Motorrad Race ABS per-
forms self-diagnosis to ensure its
operability. Self-diagnosis is per-
formed automatically when you
switch on the ignition. The mo-
torcycle has to move forward a
few metres for the wheel-speed
sensors to be tested.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
ABS telltale and warning
light flashes.
Phase 2
Test of the wheel-speed
sensors as the vehicle pulls
away from rest.
ABS telltale and warning
light flashes.
ABS self-diagnosis
completed
The ABS telltale and warning
light goes out.
If an indicator showing an ABS
fault appears when ABS self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the ABS and in-
tegral braking function are not
6
77
z