BMW S 1000XR Rider's Manual page 60

The following ride modes can be
4
selected:
RAIN
: For riding on a rain-wet
58
road surface.
ROAD
: For riding on a dry road
surface.
with riding modes Pro
The following riding modes are
additionally available for selec-
tion:
DYNAMIC
: For dynamic riding
z
on a dry road surface.
DYNAMIC PRO
riding (only with coding plug
installed).
With the motorcycle at a stand-
still, the selected mode is ac-
tivated after approximately two
seconds.
The newly selected riding
mode is activated as you
ride only when the following
preconditions are satisfied:
Throttle twistgrip is in idle posi-
tion.
Brake levers are in the released
positions.
The mode selected in this way
is retained with the engine-
characteristic, ABS, ASC/DTC
and Dynamic ESA adaptation
settings even after the ignition
OE
has been switched off.
Installing encoding plug
with riding modes Pro
Switching off ignition (
Removing seat (
: For sporty
Disconnect plug 1 from the
rear carrier.
OE
ATTENTION
39).
Dirt and damp penetrating
62).
inside open connectors
Malfunctions
Reinstall the protective cap
after removing the coding
plug.
Press in latch 2 and remove
cap 3.
Insert coding plug 4.
Position plug 1 in the rear car-
rier.
Switch on the ignition.
For safety reasons, the
riding mode is activated by de-
RAIN