BMW S 1000XR Rider's Manual page 150

9
148
Remove cover panel 1 to re-
place the bulb for the low-
beam headlight.
z
Remove cover panel 2 to re-
place the bulb for the high-
beam headlight.
Disconnect connector 3.
Disengage spring clip 4 at left
and right and swing it up.
Remove bulb 5 from the
socket.
Replace the defective bulb.
NOTICE
Bulbs with higher light-intensity
ratings are available through af-
termarket suppliers. These bulbs
burn out more rapidly and gener-
ate more heat than conventional
bulbs. Under adverse conditions
the extra heat can cause damage
to the headlight.
Bulbs for the low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
Hold the bulb by the base only,
in order to keep the glass free
of foreign matter.