Storing The Setting; Recalling A Setting; Resetting The Instrument; Recalling A User Setting - Agilent Technologies 8156A Operating And Programming Manual

6.1 Storing the Setting

6.2 Recalling a Setting

Figure 6-1 The Display when Recalling the Default Setting
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Storing and Recalling Settings
Storing the Setting
To store the current instrument setting
1. Press S .
TORE
2. Select the location where you want to store the setting, using the
⇑ or the ⇓ .
3. Press E .
XEC

Resetting the Instrument

To reset the instrument, you should recall the default setting
1. Press R . The DEFAULT location is shown on the display.
ECALL
2. Press E .
XEC

Recalling a User Setting

To recall a setting that is stored
77