Stylus Pro 5000
9. Remove 3 screws (CBS, 3×6) securing the pump frame to the right
frame, then remove the pump frame. (See Figure 4-48.)
REMINDER
During assembly, insert the cap positioning
pin and the ink valve driver gear into the
corresponding holes. (See Figure 4-49.)
There is a bushing that holds the ink valve
driver gear to the right frame. During
assembly, insert the bushing tab into the
hole on the right frame (See Figure 4-49.)
Pump Frame
Screws (CBS, 3×6)
Right Frame
Figure 4-48. Pump Frame Removal
Screw (CBS, 3×6)
Chapter 4 Assembly and Disassembly
Ink Valve Driver Gear
Cap Positioning Pin
Slot for Bushing Tab
Figure 4-49. Pump Frame Assembly
4-25