Epson Stylus Pro 5000 Service Manual page 107

Stylus Pro 5000
13. Loop the hopper timing belt around combination gear (18.144, 24).
(See Figure 4-99.)
Hopper Timing Belt
Combination Gear (18.144, 24)
Figure 4-99. Installing the Hopper Timing Belt (see Figure 4-86 for
correct belt position)
14. Place gear (32) on its shaft with the ribs facing outside and positioned
as a clock reading 10:35. The 2 holes on gear (32) should be aligned
with 2 holes on the right frame. (See Figure 4-100.)
E-ring
Figure 4-100. Installing Gear (32)
15. Secure the gear with an e-ring. (See Figure 4-100.)
16. Place a black washer on the same shaft. (See Figure 4-101.)
Washer
Figure 4-101. Installing the washer
Chapter 4 Assembly and Disassembly
Gear (32)
Set ribs at the
10:35 position.
Combination Gear
(18.144, 24)
4-48