Epson Stylus Pro 5000 Service Manual page 110

Stylus Pro 5000
27. Place the planetary lever lifter on shaft "B" and secure it with a c-ring.
(See Figure 4-108.)
Planetary Lever Lifter
Shaft "B"
Figure 4-108. Installing the Planetary Lever Lifter
28. Place gear (13.8) on shaft "C", then place the ASF planetary lever on
shaft "C." (See Figure 4-109.)
Shaft "C"
Gear (13.8)
Figure 4-109. Installing the ASF Planetary Lever
C-ring
E-ring
ASF Planetary
Lever
29. Secure the ASF planetary lever with an e-ring (#2.3). (See Figure
4-109.)
30. Place gear (35.4) on the same shaft as the ASF cam. (See Figure
4-110.)
CAUTION
You are about to cover combination gear
(18.144, 24). Make sure all positioning pins have
been removed from it.
Gear (35.4)
Figure 4-110. Installing Gear (35.4)
Chapter 4 Assembly and Disassembly
4-51