Configuring Telnet For Windows 2000 And Windows Xp; Installing Avaya Communication Manager - Avaya S8400 Installing And Configuring

Configuring Telnet for Windows 2000 and Windows XP

The Microsoft Telnet application might be set to send a carriage return (CR) and a line feed (LF)
whenever you press Enter. The Communication Manager installation program sees this as two
key presses. If you are running Windows 2000 or Windows XP, you must correct this setting
before you copy the Remaster Program to the solid state disk (SDD).
1. Click Start > Run to open the Run dialog box.
2. Type telnet and press Enter to open a Microsoft Telnet session.
3. Type unset crlf and press Enter.
4. Type display and press Enter to verify that you see the message Line feed mode -
Causes return key to send CR.
5. Type q and press Enter to exit the telnet session.

Installing Avaya Communication Manager

Use a Telnet session to access the information on the CD-ROM.
1. On your Services laptop computer, click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter to view the first screen.
Note:
To navigate on these screens, use the arrow keys to move to an option, and then
Note:
press the spacebar to select the option. Press Enter to submit the information on
the screen.
Installing and Configuring the Avaya S8400 Media Server
Configuring Telnet for Windows 2000 and Windows XP
27
February 2007