Chapter 1: Introduction
Use these procedures to install Avaya Communication Manager and configure a new Avaya
S8400 Media Server and the associated components.
To configure the media server, use the Avaya Installation Wizard. To configure gateways and
other hardware components, use the following two administration interfaces:
The Maintenance Web Interface
●
The command line interface, either directly or through Secure Shell (SSH), Telnet, or a
●
terminal emulation program such as Avaya Native Configuration Manager.
This installation document includes the following information:
Pre-installation requirements
●
Configuring the SNMP modules in the UPS
●
Media server configuration
●
IP interface translations
●
IP interface configuration
●
Postinstallation administration
●
Installation verification
●
Media server access
●
Installation troubleshooting
●
Audience
This documentation is for the following people who install and configure the media server
components:
Trained field installation and maintenance personnel
●
Technical support personnel
●
Authorized business partners
●
Installing and Configuring the Avaya S8400 Media Server
on page 9
on page 29
on page 37
on page 41
on page 47
on page 53
on page 63
on page 73
on page 21
7
February 2007