Avaya S8400 Installing And Configuring page 43

3. Clear the Address Resolution Protocol (ARP) cache in the laptop.
4. To log into the SIPI, use SSH and the IP address 192.11.13.6.
For information on how to use SSH, see
server with SSH
Note:
While connected to the SIPI, type help or ? to obtain online help. Most
Note:
commands have two or three letter abbreviations.
5. Type ipsilogin and press Enter.
Note:
The craft login used on the SIPI has a different password from the craft login used
Note:
on the media servers.
6. Log in as craft.
Prompt = [IPADMIN]:
7. Type show control interface and press Enter and then type show port 1 and
press Enter to see the current control interface settings.
8. To set the control interface, type set control interface ipaddr netmask and
press Enter, where ipaddr is the customer-provided IP address and netmask is the
customer provided subnet mask.
9. Type quit and press Enter to save the changes and exit the SIPI session.
10. Log back in to the SIPI using SSH.
Installing and Configuring the Avaya S8400 Media Server
on page 63.
Accessing the command line interface of the
SIPI address configuration
February 2007
43