Siemens SINAMICS S120 Function Manual page 883

Link Object, Instance Number: F6 hex
Supported services
Class
Table 11- 50 Class Attribute
No.
1
2
3
Table 11- 51 Instance Attribute
No.
1
2
3
4
5
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
• Get Attribute all
• Get Attribute single
Service Type
get UINT16
get UINT16
get UINT16
Service Type Name
get UINT32 Interface Speed
get - Interface Flags
get ARRAY Physical Address r8935 Ethernet MAC address
get, Struct of Interface Coun-
get_and_ ters
clear
UINT32 In Octets
UINT32 In Ucast Packets
UINT32 In NUcast Pack-
ets
UINT32 In Discards
UINT32 In Errors
UINT32 In Unknown Pro-
tos
UINT32 Out Octets
UINT32 Out Ucast Pack-
ets
UINT32 Out NUcast
packets
UINT32 Out Discards
UINT32 Out Errors
get, Struct of Media Counters
Instance
Name
Revision
Max Instance
Num of Instances
Value/explanation
0: link down,
10: 10 Mbps,
100: 100 Mbps
Bit 1: Link-Status
Bit 2: Duplex Mode (0: half duplex, 1 duplex)
Bit 3 - 5: Automatic state identification
Bit 6: Reset required
Bit 7: Local hardware fault (0 = ok)
Optional, required if the "Media Counters Attribute"
is implemented.
Received octets
Received Unicast packets
Received non-Unicast packets
Incoming packets, not processed
Incoming packets with errors
Incoming packets with unknown protocol
Sent octets
Sent Unicast packets
Sent non-Unicast packets
Outgoing packets, not processed
Outgoing packets, with errors
Media-specific counters
Communication
11.5 Communication via EtherNet/IP
• Get Attribute all
• Get Attribute single
• Set Attribute single
883