Siemens SINAMICS S120 Function Manual page 1055

Name
Parameter filter
Selecting the operating
display
User parameter list
Unplug while voltage is
present
Actuating keys
Overview of important parameters (see SINAMICS S120/S150 List Manual)
All drive objects
• p0005[0...1]
• p0006
• p0013[0...49]
• p0971
Drive object, Control Unit
• r0002
• p0003
• p0004
• p0007
• p0008
• p0009
• p0011
• p0012
• r0019.0...14
• p0977
Other drive objects (e.g. SERVO, VECTOR, X_INF, TM41 etc.)
• p0010
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Description
Using the parameter filter in p0004, the available parameters can be filtered corresponding to
their particular function.
Actual values and setpoints are displayed on the operating display.
The operating display can be set using p0006.
Using the user parameter list in p0013, parameters can be selected for access.
The BOP can be withdrawn and inserted under voltage.
The ON key and OFF key have a function.
•
When withdrawing, the drives are stopped.
After inserting, the drives must be switched on again.
The ON key and OFF key have no function.
•
Withdrawing and inserting has no effect on the drives.
The following applies to the "P" and "FN" keys:
When used in a combination with another key, "P" or "FN" must be pressed first and then
•
the other key.
BOP status display selection
BOP status display mode
BOP user-defined list
Save drive object parameters
Control Unit status display
BOP access level
BOP display filter
BOP backlighting
BOP drive object after powering up
Device commissioning parameter filter
BOP password input (p0013)
BOP password confirmation (p0013)
CO/BO: Control word, BOP
Save all parameters
Drive, commissioning parameter filter
A.4 Parameterization using the BOP20
Appendix
1055