Siemens SINAMICS S120 Function Manual page 855

I&M parameters
Table 11- 18 Parameter designation, assignment and meaning
I&M parameter Format
designation
I&M 0: -
IM_SUPPORTED
I&M 1: Visible
TAG_FUNCTION string
I&M 1: Visible
TAG_LOCATION string
I&M 2: Visible
INSTALLATION_D string
ATE
I&M 3: Visible
DESCRIPTOR string
I&M 4: Octet
SIGNATURE string
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Size/oct Initialization
ets
- -
32 Space
0x20...0x20
22 Space
0x20...0x20
16 Space
0x20...0x7E
54 Space
0x20...0x20
54 Space
0x00...0x00
11.3 Communication via PROFINET IO
SINAMICS Meaning
parameters
r8820[62,63] The parameter indicates which I&M data sets
are supported.
The value 0x1E indicates that I&M data sets
1...4 are available.
p8806[0...31] Text that identifies the function or task of the
device.
p8806[32...53] Text that identifies the device location.
p8807[0...15] Text with the date of the installation or the
initial commissioning of the device. The fol-
lowing date formats are supported:
YYYY-MM-DD
•
YYYY-MM-DD hh:mm
•
– YYYY: Year
– MM: Month 01...12
– DD: Day 01...31
– hh: Hours 00...23
– mm: Minutes 00...59
The separators between the individual speci-
fications, i.e. hyphen '-', blank ' ' and colon ':',
must be entered.
p8808[0...53] Text with any comments or notes.
r8809[0...53] The parameter is automatically populated by
the system, in which case it contains a func-
tional check signature for the change tracking
with Safety Integrated. The check signature
has the following format:
The first four octets (0...3) contain the
•
content of parameter r9781 index 0: "SI
change monitoring checksum (Control
Unit)".
The second four octets (4...7) contain the
•
content of parameter r9782 index 0: "SI
change monitoring time stamp (Control
Unit)".
The remainder (octets 8...53) contains
•
zeroes.
Communication
855