Checking Power Supply Leds - Avaya 8300 Series Routine Maintenance

Inspecting Equipment
Figure 9: Switch fabric Module LEDs
The following table describes the Switch fabric module LED indicators.
Table 2: Switch fabric module fan LED
Fan 1, 2

Checking power supply LEDs

Follow the guidelines in this section to ensure operability.
Procedure steps
1. Power on the chassis. Verify that the power output LED for each power supply turns
62 Routine Maintenance
Green/Steady
Amber/Steady
green.
Caution:
Do not mix power supply types. Do not mix power supply types in the 8306 or
8310 chassis. All installed PoE 8348TX-PWR and 8348GTX-PWR modules lose
PoE power when the chassis detects mixed power supplies.
The following figure shows the location of the power output LED for all DC power
supplies.
The specified fan is operating normally.
A fan tray is not present in the specified slot, is not
turned on, or has failed.
May 2011