Chapter 4: DC power supply fundamentals
This section provides the basic information about the Ethernet Routing Switch 8300 DC power supplies.
Navigation
•
Power supply LED
•
Ethernet Routing Switch 8300 series chassis
•
8005DI DC power supply
•
8005DC power supply
•
Redundant power configuration
Power supply LED
The following table describes the power supply Light Emitting Diode (LED) on the DC power
supply.
Table 2: Power supply LED
State
Off
On (green)
DC power supply accessories
The Ethernet Routing Switch 8300 chassis ships with no installed power supplies. Install the
first power supply in the left-most bay. Power supply bays are numbered 1, 2, and 3 from left
to right as viewed from the front of the chassis for the 8306 and 8310. For instructions to install
the power supply, see
Installation — DC Power Supply
on page 21
on page 22
on page 23
on page 24
No output is present
Power supply output is normal
Installing the DC power supply
on page 22
Description
on page 29.
May 2011
21