Power Supply Cords - Avaya 5900 Series Installing Manual

Installation preparation
Model
5928GTS
5928GTS-PWR+
5928GTS-uPWR
5928MTS-uPWR
5952GTS
5952GTS-PWR+
59100GTS
59100GTS-PWR+

Power Supply Cords

Each control unit and expansion module requires a switched power outlet socket rated at 110-240V
AC, 50-60 Hz. Connection from that power outlet socket requires an appropriate locale specific
power cord which is not supplied with the unit and must be ordered separately.
Power cords must not be attached to the building surface or run through walls, ceilings, floors and
similar openings. Installation measures must be taken to prevent physical damage to the power
supply cord, including proper routing of the power supply cord and provision of a socket outlet near
the fixed equipment or positioning of the equipment near a socket outlet.
Power cord type and order codes
Two modular power supplies are supported and each power supply has its own power cord.
The Ethernet Routing Switch 5900 Series models that support PoE use 1000 W or 1400 W power
supply, this power supply is unique to Ethernet Routing Switch 5900 Series. The power adapter on
1000 W or 1400 W power supply utilizes an IEC 60320 C16 connector. The IEC 60320 C16
connector accepts only an IEC 60320 C15 mating power cable and the IEC 60320 C16 connector
September 2017
Number of PSUs
1
2
1
2
1
2
1
2
1
2
1
2
1
2
3
4
1
2
3
4
Installing Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
Power Supply rating
450 W
450 W
1400 W
1400 W
1400 W
1400 W
1400 W
1400 W
450 W
450 W
1400 W
1400 W
450 W
1400 W
MTBF (hours)
248,756
199,203
246,741
208,803
254,165
214,112
243,895
206,761
241,078
194,249
239,731
203,776
150,386
130,727
115,613
103,632
145,094
131,088
119,548
109,875
22