Removing A Module; Prerequisites - Avaya 8300 Series Routine Maintenance

Ethernet routing switch

Hide thumbs Also See for 8300 Series:

Table of Contents

Chassis slots and backplane cleaning

2. Pull the filler panel away from the slot.

Removing a module

Remove a module to clean the chassis slots or backplane. Removing a module takes three to

five minutes.

• Before you remove a 8393 or 8394 SF/CPU module, back up your configuration. If the

chassis has only one SF/CPU module and you remove that module, the switch does not

operate.

• Ensure that traffic is not traversing the module. First, disable the module. For further

instructions, see Avaya Ethernet Routing Switch 8300 Configuration — Modules,

NN46200-305.

Warning:

Risk of eye injury

Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look

into an optical fiber or connector port. Always assume that fiber optic cables are connected

to a light source.

Caution:

Risk of equipment damage

Electrostatic discharge can damage hardware. Follow ESD procedures to protect your

equipment from damage

Caution:

Risk of electromagnetic interference

Routine Maintenance

May 2011

Table of Contents