During the updating process, a window appears in the middle of the screen, showing
messages giving the progress of the update: Initializing, Installing the
Firmware, and Rebooting Device.
Figure 57.
When the update is completed, the message window closes and the message
Firmware Upload Complete appears near the top of the screen. The new firmware
filename appears beside Version in the Firmware panel of the web page.
Network Settings Panel
In the Network Settings panel (see
address, subnet mask, and gateway address for your IN1804, and turn DHCP on and off.
You can also view the MAC address of the unit. To set the IP addresses:
Click Edit in the lower-left corner of the Network Settings panel. The EDIT Network
1.
Settings screen opens.
Figure 58.
Firmware Update Message Window
figure
49,
Edit Network Settings Screen
IN1804 Seamless Scaling Switchers • Internal Web Pages
, on page 94), you can set the IP
7
100