Device Status Panel - Extron electronics IN1804 Series User Manual

3. Click in the Confirm Admin Password field (see figure 52,
from the Change Admin Password field.
Figure 52.
If you want to assign a user password, repeat steps 2 and 3 in the User panel (
4.
5. When finished, click Save to set the passwords. To close the window without saving a
password, click Cancel or the X in the upper-right corner.
To remove an assigned password:
1.
In the Change Admin Password or Change User Password field, enter a single space.
2. Enter a single space in the appropriate Confirm Password field.
3. Click Save.

Device Status Panel

The Device Status panel (see
time, time zone, the amount of time the device has been running (Uptime), and internal
temperature in degrees Celsius.
Syncing the IN1804 to the PC
To set the IN1804 date and time to match that of your computer:
Click Sync to PC at the bottom of the Device Status panel. When the sync is completed,
the message shown in figure 53 appears in the upper-right corner of the screen.
Figure 53.
Passwords Dialog Box with Administrator Password Entered
figure 49,
Sync to PC Success Message
IN1804 Seamless Scaling Switchers • Internal Web Pages
) and repeat the password
2
, on page 94) displays the current date,
4
).
3
97