Command And Response Tables For In1804 Sis Commands - Extron electronics IN1804 Series User Manual

Command and Response Tables for IN1804 SIS Commands

Command
Input Configuration
Input Selection
Select input
View current input
Input Video Format
View detected input format
Input Name
Write input name
View input name
Input EDID
Specify an EDID value
View assigned EDID
Save the output EDID to a
custom slot
View EDID native resolution
Example:
Export EDID file
Import EDID file
NOTES:
Import EDID
• For the
Filename
• < > can optionally be a full path name. The EDID file format is .bin, with 128 or 256 bytes of binary data.
• Exporting a default EDID (
KEY:
X!
= Input selection
X@
= Output
X#
= Input digital video format (view only)
X1$
= Input name (text label)
X2!
= EDID emulation
ASCII Command Response
(Host to Switcher) (Switcher to Host)
X! ! In X!
! X!]
X! *\
X#]
Verbose modes 2 and 3:
Vtyp X! * X#]
E X! , X1$ NI } Nmi X! , X1$]
E X! NI }
X1$]
E A X! * X2! EDID } EdidA X! * X2!]
E A X! EDID }
X2!]
E S X@ * X2! EDID } EdidS X@ * X2!]
E N X2! EDID } nnnn
Verbose modes 2 and 3:
EdidN X2! * nnnn
EdidN013*1280x768 @59.87Hz
E E X2! ,<filename>EDID }
EdidE X2!]
E I X2! ,<filename>EDID }
EdidI X2!]
201
X2!
file command, can be
X2! 10 76
value of through
1
= DisplayPort input 1 (all models)
2
= HDMI or DVI input 2 (all models)
3
= HDMI or DVI input 3 (all models)
4
= HDMI or DVI (standard and DO), TP (DI and DI/DO)
1
= TP Output 1A (IN1804 DO and DI/DO)
2
= HDMI output 1B
0
= No input signal detected,
Can contain up to 32 characters, excluding
See the
IN1804 Seamless Scaling Switchers • SIS Configuration and Control
Additional Description
All ]
• Select input
View the current input.
View video format
Set name
View name
Assign EDID
View EDID
Save the EDID of output
NOTE:
nnnn nn nn Show the resolution and refresh rate of
x •@ . Hz
EDID
nnnn nn nn
x •@ .
Export EDID
Import EDID
205
through only.
) results in HDMI with LPCM-2Ch audio EDID being exported.
HDMI output 1A (IN1804 and IN1804 DI)
1
= DVI,
input EDID table on page 53.
X!
.
X# X!
of input .
X1$ X!
for input .
X1$ X!
assigned to input
X2! X!
to input .
X2! X!
for input .
X@ X2!
to
X2!
For this command,
201 205
be through only.
X2!
.
Hz
X2! filename
to < >.
X2! filename
from <
2 3
= HDMI, = DisplayPort
, *
(comma) , , and
.
.
can
>.
|
.
60