Roles And Permissions Panel - Extron electronics IN1804 Series User Manual

To view the status and type of all inputs, click the 3 More link in the lower-left corner of the
Inputs panel (see
shows an example of an IN1804 DO Inputs dialog box.
Figure 51.
When finished viewing the input information, click the X in the upper-right corner of the
dialog box to close it.

Roles and Permissions Panel

In this panel (
NOTE: The following rules apply to passwords:
• Length is 1-128 characters.
• All human-readable characters are permitted except | .
•
The password cannot be a single space.
• Passwords are case-sensitive.
• A user password cannot be assigned if no administrator password exists. An
E14 error code is returned.
• If the Admin password is cleared, the user password is cleared as well.
Setting a password
NOTE: The factory configured passwords for all accounts on this device have been set
to the device serial number. This password is administrator level. Passwords are case
sensitive.
To assign administrator and user passwords:
1. In the Roles and Permissions panel, click Edit. The Role and Permission
Settings dialog box opens
2. In the Admin panel, click the Change Admin Password link and enter the new
administrator password in the field below (see
figure 49, , on page 94) to view the Inputs dialog box. Figure 51
2
Inputs Dialog Box for an IN1804 DO
) you can set and remove administrator and user passwords.
3
IN1804 Seamless Scaling Switchers • Internal Web Pages
figure 52, , on the next page).
1
96