3.
When finished editing, click SAVE to confirm changes or CANCEL to close the window
without making changes. Clicking the X in the upper‑right corner of the screen also
closes the window without saving the changes.
4.
Alternatively, click Sync to PC (
Network Settings Panel
In the Network Settings panel, set the IP address, subnet mask, and gateway address for
the switcher, and turn DHCP On and Off.
To set the IP addresses:
1.
Click EDIT (see figure 40, [left],
Settings panel opens to allow edits (right).
Figure 40.
2.
Edit the network settings as desired:
a.
Click DHCP (
configures its IP address and other network settings from the DHCP server. The
default is Off.
b.
To set any of the addresses (IP Address (
address (
3.
When finished editing, click SAVE to confirm changes or CANCEL to close the window
without making changes. Clicking the X in the upper‑right corner of the screen also
closes the window without saving the changes.
) to set the date and time according to the PC.
2
) in the Network Settings panel. The Network
1
Network Settings Panel
) to toggle DHCP on and off. When DHCP is enabled (
2
), click in the desired field and enter the address.
5
), Subnet mask (
), and Gateway
3
4
DTP2 R 212 Series • Internal Web Page
On
), the unit
58