Extron electronics IN1804 Series User Manual page 70

Seamless scaling switchers
Hide thumbs Also See for IN1804 Series:
Table of Contents

Advertisement

Command
Input Configuration (continued)
Auto-input Switch Mode
Set the auto-input switch
mode
View auto-input switch
mode
Set user priority order for
auto-input switch mode 1
Set Priority
NOTE:
The
View mode 1 priority order
Set timeout
View timeout
KEY:
X3)
= Auto-input switch mode
X3!
= Input number for setting user priority
X3@
= Auto-input switch timeout
ASCII Command
Response
(Host to Switcher)
(Switcher to Host)
EX3)
}
AUSW
Ausw
E
}
X3)]
AUSW
E
X3!
X3!
X3!
X3!
}
P
AUSW
AuswP
E13
command returns an
error code unless the correct number of
E
}
X3!
P AUSW
E T X3@ AUSW }
AuswT X3@]
E TAUSW }
X3@]
IN1804 Seamless Scaling Switchers • SIS Configuration and Control
Additional Description
X3)]
Set the auto-input switch mode to
View current auto-input switch mode
X3)
.
X3!
X3!
X3!
X3!]
Set the input priority switching order,
highest priority (first) to lowest (last).
X3!
X3!
X3!]
View the order in which the inputs will
be selected in auto-input switch mode
1 (highest to lowest priority).
Set the amount of time without video to
switch to the previous input.
View the auto-input switch timeout
duration in seconds.
0
= Disabled — Manual switching (default)
1
= User-defined priority mode — The switcher selects the
input to which the user assigns priority. If no priority is
assigned, the switcher selects the active input with the
lowest number.
2
= Last connected mode — The switcher selects the
most recently applied input, and retains a history of the
order in which active inputs are connected to the unit. If an
active input is removed, the switcher switches to the most
recently prioritized input.
Arrange input numbers in user priority order.
1
2
3
= input 1,
= input 2,
= input 3,
Amount of time without video that elapses before switching to
the input with the next priority.
1
500
through
(in 1-second increments, default =
0
= Immediately switch to the input with the next priority if the
current input is removed.
X3)
.
X3!
variables are entered.
4
= input 4
3
seconds)
62

Advertisement

Table of Contents
loading

This manual is also suitable for:

In1804 doIn1804 di/doIn1804 di

Table of Contents