Outputs Panel; Firmware Panel - Extron electronics IN1804 Series User Manual

Outputs Panel

The Outputs panel (see
of the outputs, their signal type, and the HDCP status of all connected outputs.
The following status symbols may be displayed for connected outputs:
Symbol
No Display

Firmware Panel

The Firmware panel (
updated. You can also update the firmware on your IN1804 from this panel (firmware files
can be downloaded from www.extron.com, see
page 103).
To update firmware:
In the Firmware panel, click the Select File button.
1.
2. In the Open dialog box, browse to locate the new firmware file on your computer (by
default the file is stored at C:\Program Files (x86)\Extron\Firmware\IN1804 after
being downloaded from the Extron web page).
NOTE: Firmware files for IN1804 have a .eff extension. Do not attempt to load any
other file types.
3. Double-click the firmware file name. The Open window closes, and the selected
firmware file name appears in the Update Firmware panel on the web page (see
figure 56,
Figure 56.
4. Click Update to begin (
right of the name.)
figure 49,
, on page 94) displays the resolution and refresh rate
5
Definition
The display is HDCP compliant.
The display is not HDCP compliant, or no signal is being received from
the connected display.
No display is connected.
) displays the current firmware version and the date it was last
6
).
1
Firmware Update Dialog Box with a Firmware File Selected
). (If you want to cancel the update, click the x (
3
IN1804 Seamless Scaling Switchers • Internal Web Pages
Downloading Updated Firmware on
) at the
2
99