Table of Contents
Advertisement
Network Panel
In the Network panel you can set the hostname, IP address, subnet mask, and gateway
address for your UCS 303, and turn DHCP on and off. You can also view the MAC address
of the unit. To set the IP addresses:
1.
Click the down arrow at the right of the
Figure 33.
2.
Edit the network settings as desired:
•
Device Name / Hostname— Enter a name for the unit (see figure 33,
DHCP — Click the DHCP button (
•
enabled (
DHCP server. The default is
IP Address (
•
Server (
the address.
3.
When finished editing, click
window without making changes. You can also close the window by clicking the X in the
upper-right corner of the screen.
NOTE: If DHCP is being enabled, the web page attempts to redirect and connect to the
unit via the unit name (TCP/IP hostname). If a static IP address is being set, the web
page attempts to connect to the new IP address.
Network
Edit Network Settings Screen
2
), the unit configures its IP address and other network settings from the
On
.
Off
), Subnet Mask (
3
4
) — To set any of these addresses, click in the desired field and enter
6
(
) to confirm your changes or CANCEL to close the
7
SAVE
field to view the network settings.
) to toggle DHCP on and off. When DHCP is
), Default Gateway address (
UCS 303 • Internal Web Page
).
1
), DNS
5
58
Advertisement
Table of Contents
