Avaya CallPilot 600r Maintenance And Diagnostics page 58

Monitoring multimedia hardware
Figure 9: Multimedia monitor screen
3. Do one of the following:
4. Click Courtesy Stop or Start, as required.
58 Avaya CallPilot® 600r Server Maintenance and Diagnostics
Note:
For an explanation of the channel states, see the CallPilot Manager online Help.
If you want to stop or start
all of the channels associated with a
DSP
only one or several channels that are
associated with a DSP
Result: If you clicked Courtesy Stop or Start, you are asked to confirm the Courtesy
Stop or Start. Click OK.
The selected channels change to off-duty or on-duty status, according to the action
you chose.
Note:
If the buttons are not available, wait a few seconds for the screen to refresh.
Then
select the Select All check box to the left
of the DSP that you want to stop or
start.
Repeat this step for each DSP.
select the check box for each channel
that you want to stop or start.
December 2010