Avaya CallPilot 600r Maintenance And Diagnostics page 97

To upgrade or configure the BIOS
1. Enter 1 to run the 600r server BIOS update from the Avaya CallPilot Image Menu.
2. Enter Y to confirm.
3. Power off your server by pressing the power button on the server faceplate, and
4. Enter 3 to run Utilities (BIOS, Firmware, etc...) from the Startup Menu. If the Startup
5. Enter 2 to run the 600r server FRU/SDR firmware update from the Avaya CallPilot
6. Enter Y to confirm.
7. Power off your server by pressing the power button on the server faceplate, then
8. Remove the Image DVD from the DVD drive and enter any key.
9. The BIOS upgrade is complete.
Avaya CallPilot® 600r Server Maintenance and Diagnostics
Result: The Avaya CallPilot Image Menu appears.
1. 600r server BIOS update
2. 600r FRU/SDR firmware update
3. 600r server Display Non-Default CMOS Settings
4. 600r server SSU
5. Reboot
6. Goto DOS
Result: The following message appears:
Enter Y to update the BIOS [Y,N]
Result: The system displays the BIOS update progress and the following message
appears:
Update is now complete...
PLEASE POWER DOWN physically in order for the settings to take effect!
then power on the server by pressing the power button again.
Result: The system reboots and the Startup Menu appears.
Menu is not displayed, see
96.
Image Menu.
Result: The following prompt appears: Enter Y to update the FRU,SDR [Y,N]
Result: The system displays the FRU/SDR update progress and the following
message appears.
Update is now complete...
PLEASE POWER DOWN physically in order for the settings to take effect!
power on the server by pressing the power button again.
Result: The system reboots and the Startup Menu appears.
Result: The system reboots.
Requirements for upgrading or reconfiguring the BIOS
To display the Avaya CallPilot Image Menu on page
December 2010 97