Avaya CallPilot 600r Maintenance And Diagnostics page 86

Replacing basic chassis components
Figure 22: Removing DVD-ROM drive assembly from chassis
9. Press downward on the side of the bracket where the blue captive screw is attached
10. Remove the two small screws that attach the backplane to the drive and put them
11. Remove the DVD-ROM drive from the carrier.
12. Attach the backplane to the replacement drive, using the screws removed in step
13. Install the new DVD-ROM drive in the carrier.
86 Avaya CallPilot® 600r Server Maintenance and Diagnostics
to release the DVD-ROM drive from the drive bracket.
aside to install the new DVD-ROM.
9. For details, see A in
chassis on page 86.
a. Line up the pins on each side of the bracket (two on each side) with the
holes in the drive and set the replacement DVD drive into the drive
bracket. Push gently on one side of the bracket to push the pins into
place.
b. Screw the carrier shut with the three screws.
c. Reconnect the power and ribbon cables.
Figure 22: Removing DVD-ROM drive assembly from
December 2010