Avaya DEFINITY Installation And Test page 98

DWBS Testing
5. Confirm that the WFB's green power indicator is illuminated.
If...
Power indicator is
illuminated
Power indicator is
not illuminated
Once the preceding procedures are completed, the DWBS is considered up and
running.
4-18 Issue 6 September 2001
Then...
Power is OK.
Check the connection between the power
supply and the WFB. (See Chapter 3 of this
document for power and cabling details.) If
the problem persists, the WFB may need to
be replaced. Refer to the DWBS
Maintenance document for additional
information. Repeat Step 1 of this procedure
to obtain the cell ID only after the problem
has been resolved.