Avaya DEFINITY Installation And Test page 20

Switch Administration
to re-assign and/or reuse the downloadable Cluster ID associated with a
radio controller circuit pack. The Cluster ID, also known as a Cell ID, is
used by the switch to page a WT in a specific cell. The Cluster ID for an
administered radio controller circuit pack is displayed on the list
configuration radio controller command.
The RC# field is a system assigned ID that cannot be changed.
The Location field contains the circuit pack address PPCSS of an
administered radio controller circuit pack. The field is populated and
maintained by the system. It cannot be changed by the user.
The ID field contains the Cluster ID for an RC.
a. On a new system, where there are no radio controllers
b. When a radio controller circuit pack is added to the system using the
c. To re-assign or reuse a Cluster ID, change the ID field for an RC.
change system-parameters wireless
RC# Location ID
2
1: 02C08
9
2: 02C09
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
Figure 2-5. Radio Controller Cluster ID Assignments
2-8 Issue 6 September 2001
administered, the default value for all Location and ID fields is blank.
add radio command, the ID field for that RC contains a system
assigned ID from 1-32. This number can be verified using the list
configuration radio-controller all command.
Valid values are 1-32.
RADIO CONTROLLER CLUSTER ID ASSIGNMENTS
RC# Location ID RC# Location ID
33:
17:
34: 02C14
18:
35:
19:
36:
20:
37:
21:
38:
22:
39:
23:
40:
24:
41:
25:
42:
26:
43:
27:
44:
28:
45:
29:
46:
30:
47:
31:
48:
32:
Page 2 of 4
RC# Location ID
49:
9
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64: