Avaya DEFINITY Installation And Test page 21

Procedure: Software Installation
16. Submit the completed form.
17. Execute the change carrier-frequencies command to administer the
carrier frequencies.
change carrier-frequencies
Customer Carrier Frequencies (MHz)
0: 1929.375
y
1: 1928.125
y
2: 1926.875
y
3: 1925.625 y
4: 1924.375
y
5: 1923.125
y
6: 1921.875
y
7: 1920.625 y
Figure 2-6. Wireless Carrier Frequencies Form
NOTE:
Once an ID has been changed, busyout, reset and release must be
done for each RC board whose ID has changed in order for it to get
downloaded to the RC board.
NOTE:
All frequencies that are administered as y on the System-Parameters
Wireless form are also defaulted to y on the Carrier-Frequencies
form. This form must be changed only if the customer is not going to
use a frequency that has been approved for use by the FCC.
If this field is changed, you must busy out, reset, and release all
administered RCs before the change will be read into the RCs.
WIRELESS CARRIER FREQUENCIES
NOTE:
This form enables the user to limit the radio transmission to a subset
of those carrier frequencies allowable for the DWBS. The form allows
the user to limit radio transmissions without infringing upon any
UTAM restrictions.
Page 1 of
Issue 6 September 2001
1
2-9