Avaya DEFINITY Installation And Test page 94

DWBS Testing
Table 4-2. WT Download Error Codes (continued)
Error Code
0x892
0x893
0x894
0x895
0x897
0x898
NOTE: The 9630 Series WT boot code firmware provides the automatic restart of
the download process with low severity errors. The download process is
attempted three times if the problem continues to occur. Thereafter, the error is
declared as a high severity error, and user intervention is required.
4-14 Issue 6 September 2001
Severity Description/Recommendation
High RC is busy receiving a WT package from the
MSS.
Wait for the download from the MSS to complete.
This should take about five minutes.
High The RC flash does not contain a WT file to use
for an upgrade.
Check the Feature-Related System Parameters
form at the bottom of page 2 for the RC circuit
pack. If the circuit pack is not listed, issue the
change system feature command and add it to
the list. Then issue the enable wt-upgrade
[PPCSS] command.
High The RC flash contains firmware for a different
model WT.
Download the correct firmware package. Then
check the Feature-Related System Parameters
form at the bottom of page 2 for the RC circuit
pack. If the circuit pack is not listed, issue the
change system feature command and add it to
the list. Then issue the enable wt-upgrade
[PPCSS] command.
High The RC flash does not recognize the type of WT
that is connected.
The RC downloads only 9601 WTs and 9630
Series WTs.
High RC was requested to download a 9601 WT;
however, the RC has only the 9630 Series WT
firmware download package to send.
Download the 9601 WT package to the RC.
High RC was requested to download a 9630 Series
WT; however, the RC has only the 9601 WT
firmware download package to send.
Download the 9630 Series WT package to the
RC.