UTAM Disablement
A power-up reset of the DEFINITY ECS generates a major power alarm, and the
DWBS will not operate until the location of the DEFINITY ECS can be verified by
an authorized Avaya representative. (However, a wired set would operate without
this verification.) The radio transmission is activated only upon confirmation of the
DEFINITY ECS location. Activation will occur automatically once the Avaya
remote monitoring center receives the alarm and can reconnect with the
DEFINITY ECS. The process normally occurs within 30 minutes of power-up. If
the remote center cannot contact the switch, a technician must be dispatched to
restore the wireless service.
1-2
Issue 6 September 2001