Avaya DEFINITY Installation And Test page 33

Procedure: Software Installation
Table 2-4. Station Form Fields (Page 3)
Field Name
Site Data
- Room
- Info1
- Info2
-Floor
-Building
-Set Color
Abbreviated Dialing
- List 1
- List 2
- List 3
Button Assignments
1. call-appr
2. call-appr
3. call-appr (9601+ only)
1. brdg-appr
2. brdg-appr
3. brdg-appr (9601+ only)
1. abrdg-appr
2. call-appr
3. call-appr (9601+ only)
26. Submit the form.
Explanation
Enter up to 10 characters to identify where the WT's
charging base is located or where the WT user's room is
located.
Enter up to five characters that will be useful for
identification purposes.
Enter up to five characters that will be useful for
identification purposes.
Enter up to 10 characters to identify the location of the
owner of the particular WT.
Enter up to 10 characters to identify the location of the
owner of the particular WT.
Enter black for the DWBS WT.
Enter p for personal, s for system, g for group, or e for
enhanced. A maximum of three Abbreviated Dialing lists
can be accessed by the DWBS handset. If p or g is entered,
a personal list number or a group number, respectively, is
also required.
The listings in the left column are the only administrable
types for buttons 1, 2, and 3 that are supported by the WT.
The default is call-appr for buttons 1, 2, and 3.
The principal extension must be the same for all buttons.
The Auto Select Any Idle Appearance field must be set to y.
NOTE: The Bridged Call Alerting field should be set to y if
this option is used.
Any administered analog extension.
NOTE: The Bridged Call Alerting field should be set to y if
this option is used.
Issue 6 September 2001 2-21