Command List - Avaya DEFINITY Installation And Test

Commands

Command List

The following table provides a summary of the commands used for the
installation, administration, and maintenance of the DWBS.
Table 5-1. DWBS Commands
Action
-- download
-- list
configuration
--change
--display
-- list
configuration
-- list
-- status
-- change
-- display
-- change
-- display
-- upgrade
-- upgrade
-- list
configuration
-- add
-- change
-- list
configuration
-- remove
-- status
5-20 Issue 6 September 2001
Object Qualifier
firmware tape
all
alias station
board PPCSS
bridged-extension principal extension
card-mem
carrier-frequencies
circuit-packs cabinet number
firmware radio PPCSS
controller all
schedule
firmware WFB PPCSS
all
schedule
firmware-versions
radio-controller PPCSS
all
override
schedule
Purpose
Transfer a file containing RC,
WFB, or WT firmware from the
INADS center to the MSS of
the customer's switch.
View circuit packs in the
system, along with their
associated location, code,
vintage, and assigned ports.
Alias a station (WT)
View identified circuit pack.
List all stations where the
principal appears as a bridged
call appearance.
Display the format of the flash
card.
Administer or view
customer-administrable carrier
frequencies.
Administer or view the existing
circuit pack data. Also,
administer the RC circuit pack
logically.
Upgrade the firmware for one
or more RCs.
Upgrade the firmware for one
or more WFBs.
Display the firmware version,
size, and checksum of DWBS
components.
Administer or identify
parameters associated with or
upgrade the firmware of one or
more RCs (TN789).