Avaya DEFINITY Installation And Test page 26

Switch Administration
change alias station
Alias Set Type
9630
-------
-------
-------
-------
-------
-------
-------
-------
-------
-------
'#' indicates previously aliased set type is now native
Figure 2-10. Alias Station Form
The Alias Set Type field in the form represents the aliased set type, and it
can contain a maximum of seven characters. The associated Supported
Set Type field is a keyword field that accepts a value for any natively
supported set type. Therefore, for example, if you want three call
appearances, enter 9630 into the Alias Set Type field and 9601+ into the
Supported Set Type field. On the other hand, if you want two call
appearances, enter 9630 into the Alias Set Type field and 9601 into the
Supported Set Type field.
Once the 9630 Series WT is aliased, it is subject to all of the restrictions,
including feature capabilities, of its associated supported set type. Aliasing
is transparent to the end user.
Once you submit the form, the value that you entered into the Alias Set
Type field (for example, 9630) appears as a valid value in the Type field in
the Station form (whenever this form is accessed via the add station
command). Also, the appropriate form is displayed whenever value 9630 is
entered into the Type field in the Station form.
All other commands that accept a set type as a valid option (for example,
list station type 9630) also accept value 9630 as if it were natively
supported in the DEFINITY ECS.
2-14 Issue 6 September 2001
ALIAS STATION
Supported Set Type
9601+
-------
-------
-------
-------
-------
-------
-------
-------
-------
-------
Page 1 of 1