Avaya DEFINITY Installation And Test page 83

Procedure: WT Firmware Download and Connection
status wt-upgrade
STATUS OF WIRELESS TERMINAL FIRMWARE UPGRADE
Server Server
Location Enabled?
01C18 Yes
01C10 Yes
Figure 4-1. Status of Wireless Terminal Firmware Upgrade Form
2. Record the firmware version for the WT (if present).
3. For the 9601 WT:
a. Ensure that the WT is powered up. Then determine the WT firmware
b. Press
c. Press the Info soft key (middle up arrow).
d. Press
For the 9630 Series WT:
a. Press
b. Press
c. Press the More soft key (first up arrow).
d. Press
4. Compare the firmware reported in the WT with the firmware stored in either
the mass storage on the switch or the RC. If the firmware in mass storage
or the RC is older than or the same as the firmware in the WT, the
procedure is completed. If the firmware in mass storage or the RC is newer
than the firmware in the WT, a firmware download is required; therefore,
proceed to the next section.
WT Firmware Firmware
in Server Version
9601 0.5.7
9601 8.4.6
version by pressing
Menu
.
Next
.
Prev
.
Menu
four times.
Next
.
Next
WT WT
Connected? IPEI
No 000000000
No 0011179eb
.
Issue 6 September 2001
Page 1
State of
Operation
Idle
Idle
4-3