Avaya DEFINITY Installation And Test page 93

Procedure: WT Firmware Download and Connection
Table 4-2. WT Download Error Codes (continued)
Error Code
0x82
0x83
0x84
0x85XX
0x86
0x87
0x88
0x891
Severity Description/Recommendation
Low WT timed out waiting for the program data from
the RC.
For the 9601 WT, restart the download process.
For the 9630 Series WT, the download
automatically restarts; therefore, no user
intervention is required.
High Download cable is not connected.
Connect the download cable between the RC
and the WT, and restart the download process. If
the cable is connected and the error continues to
occur, use another download cable.
High Error while programming flash device.
Restart the download process. If the error
continues to occur, try a fully charged battery.
High Flash memory erase error; reason XX.
Restart the download process. If the error
continues to occur, try a fully charged battery.
Low WT timed out waiting for RC "info" message.
For the 9601 WT, restart the download process.
For the 9630 Series WT, the download
automatically restarts; therefore, no user
intervention is required.
High RC wants to communicate at a bad baud rate.
Restart the download process.
High RC wants to send a file in an unsupported
format.
Restart the download process.
High The connected RC circuit pack is not enabled or
assigned as a server and is therefore disabled
from allowing WT upgrades.
Check the Feature-Related System Parameters
form at the bottom of page 2 for the RC circuit
pack. If the circuit pack is not listed, issue the
change system feature command and add it to
the list. Then issue the enable wt-upgrade
[PPCSS] command.
Issue 6 September 2001 4-13