Replacing The Felt Wipers - Roland VersaUV LEC2-300 User Manual

Replacing the Felt Wipers

The felt wiper is a component that is used for cleaning the print heads.
When the following screen is displayed, it is time to replace the wiper.
TIME FOR
FELT REPLACE
For information about purchasing felt wipers, contact your authorized Roland DG Corporation dealer or visit our
website (
http://www.rolanddg.com/
Be sure to perform operations as specified by the instructions, and never touch any area
CAUTION
not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
Required items
Felt wipers
Procedure
1.
Press [ENTER] when the following screen appears.
TIME FOR
FELT REPLACE
2.
Remove any media.
3.
Press [MENU].
4.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
5.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MAINTENANCE
6.
Press [▶] once, and then press [▼] once to display the screen shown below.
MAINTENANCE
REPLACE FELT
7.
Press [ENTER].
The cutting carriage moves to a location where felt wiper replacement is possible, and then the screen
shown below appears.
OPEN COVER R
8.
Open the right cover.
).
Tweezers
Replacing Parts for Maintenance
4. Replacing Consumable Parts
233